Stone CNC engraving machine operating rules

The operation procedure of stone CNC engraving machine is an important guarantee to ensure the safe and efficient operation of equipment and processing quality. The following are the operating procedures of the stone CNC engraving machine according to multiple sources:

First, prepare before operation

Wear protective equipment: operators should wear labor protection supplies, such as protective glasses, dust masks, work clothes, etc. Women workers should also wear work hats or hair nets to prevent hair from getting involved in the machine.

Check the working environment: Ensure that the working area is clean and free of debris, and avoid devices such as strong electricity and strong magnetism that may affect the operation of the equipment.

Check the connection of the equipment: make sure that the connection between the machine tool and the computer is normal, the power cord and data cable are not damaged, and have been correctly connected.

Check the equipment status: before starting the machine, check whether the lubrication and protective devices of each part of the machine meet the requirements to ensure that the equipment is in good condition.

Second, boot and return to the origin

Boot order: first turn on the machine power, then turn on the computer power, after the system starts, enter the CNC system.

Return to mechanical origin: After opening the control system, select the "Return to mechanical origin" menu to allow the machine to automatically return to the mechanical origin and correct the system coordinate system. In some cases, such as continuing operations after the last normal shutdown, you may not need to perform this step.

Third, load the processing program

Select the processing program: Select the appropriate processing program according to the processing requirements, and confirm it is correct.

Loading program: Select the "Open" menu in the CNC system, pop up the file operation dialog box, select the processing program file to be opened, and load it into the system.

Fourth, set the origin of the workpiece

Moving machine: Manually move the X and Y directions of the stone engraving machine to the desired origin position on the workpiece.

Set the origin: select the "Set the current point as the origin of the workpiece" menu, or clear the current position to zero in the coordinate setting window, so that the current position is the starting point for processing when executing the machining program.

Fifth, start processing

Check the tool and fixture: verify that the tool is properly installed and fastened, and the fixture is firmly gripping the workpiece.

Start machining: Start the machining program in the CNC system to start machining. During the processing process, the operating state and processing effect of the machine tool should be observed at any time, and if there is an anomaly, the machine should be stopped in time for inspection.

Sixth, the end of processing and cleaning

Turn off the machine: After processing, turn off the machine power first, and then turn off the computer power.

Clean up the work area: clean up the stone debris, dust and other debris in the work area to keep the environment clean.

Maintenance equipment: necessary maintenance and maintenance of the machine tool, such as cleaning the dust and oil on the guide rail, lead screw and other parts; Inspect and replace worn parts; Fill lubricating oil, etc.

Seventh, precautions

Comply with the operating rules: strictly follow the operating rules, do not arbitrarily change the equipment parameters or operating procedures.

Pay attention to safety: Pay attention to safety during operation to avoid electric shock, mechanical injury and other accidents.

Keep the equipment clean: clean the dust and oil and other debris on the equipment regularly to keep the equipment clean and dry.

Periodically check the device: Periodically check the functions and performance indicators of the device. If an exception occurs, handle it in time.

In summary, the operating procedures of the stone CNC engraving machine cover many aspects such as preparation before operation, starting and returning to the origin, loading processing procedures, setting the origin of the workpiece, starting processing, processing and cleaning up, and precautions. Only by strictly following these procedures can we ensure the normal operation and processing quality of the equipment.

Rilyn-Our company is committed to creating a one-stop shopping solution for global woodworking machinery users, we have planer saw machine, wood router machine,wood laser cutting machine and other series of equipment.