Precautions for cutting machine sawing wood

Cutting machine saw wood, need to pay attention to several aspects of security and efficiency, here are some key points for attention:

First, preparation before cutting

Equipment inspection:

Carefully check the performance of the cutting machine to ensure that all components are intact, especially the saw blade, protective cover, power lines, etc.

Check the power switch, saw blade tightness, saw blade guard or safety shield, etc., to ensure that the operating table is stable.

When working at night, there should be enough lighting brightness.

Saw blade selection:

Choose the right saw blade, according to the hardness and thickness of the wood to choose the right type of saw blade to improve cutting efficiency and protect the machine.

No-load test run:

Before the formal cutting, first open the main switch, let the cutting machine no load test turn a few laps, confirm the safety and error before cutting.

Second, when cutting operation

Safety protection:

Wear suitable work clothes, do not wear loose or tight clothing, do not wear jewelry or long hair.

Wear protective glasses when cutting to prevent splashes of wood chips from injuring eyes.

Ensure that the guard is installed correctly and keeps its position unchanged during operation.

Workpiece fixation:

The wood must be firmly fixed to avoid moving or sloshing during the cutting process, resulting in inaccurate cutting or damage to the machine.

When using a fixture or fixing system, be careful not to fix the wood with too much pressure, so as not to damage the cutting machine.

Cutting operation:

When cutting, hold the handle of the cutting machine firmly, use even force, and cut vertically down to avoid the saw blade stuck or damaged due to oblique cutting or downward cutting.

Stay focused during the cutting process and don't get distracted or talk to others.

It is strictly prohibited to cut unclamped small workpieces or profiles with serious edges to avoid accidents.

Replacing the saw blade:

If the saw blade needs to be replaced midway, be careful not to tighten the lock nut too hard to prevent the saw blade from cracking.

Environmental control:

If you use the cutter in a wet place, you need to stand on an insulating mat or dry wood to prevent electric shock.

The cutting process will produce a lot of wood chips and dust, should ensure that the work area is well ventilated, and wear a dust mask or mask.

Third, post-cutting processing

Power off:

After the cutting is completed, the power supply should be cut off immediately to prevent accidental starting.

Cleaning and maintenance:

Clean the cutting machine and the surrounding area, remove wood chips, dust and other debris.

Regular inspection of the various parts of the cutting machine, such as saw blades, bearings, transmission parts, etc., timely replacement of severely worn parts.

Safe storage:

Store the cutting machine in a dry, ventilated, non-corrosive gas place, away from direct sunlight and rain.

In short, the cutting machine needs to pay attention to many aspects of safety, efficiency and environmental protection when sawing wood. By making good preparation before cutting, operation during cutting and post-cutting treatment, you can ensure the safe and smooth cutting process and extend the service life of the cutting machine.

Rilyn-Our company is committed to creating a one-stop shopping solution for global woodworking machinery users, we have planer saw machine, wood router machine,wood laser cutting machine and other series of equipment.